EFUN Pusa v6 - reference-fitted exterior reconstruction

Open Pusa-Efun-v6-PBR.glb in F3D or F3D Android. The single GLB contains all 336 components, 36 materials, 11 embedded texture images and 3 lights. No external texture files are required. GLB units: metres, Y-up.

This revision reshapes the saddle into a fuller passenger section and narrower rider nose with flatter upholstery shoulders, fitted seams, individual thread detail and fine vinyl grain. It refines the nacelle shoulders, grab-rail profiles, wheel-spoke depth, panel-edge reveals, headlamp reflector facets, shallow diagonal tail optics, EFUN print/emblem, floor-insert relief and valve collars. The front brake was moved to the reference side. Coated graphite paint, rubber, vinyl, brushed metal, cast alloy, polished chrome and optical plastic have separate material finishes. The silver wheel faces are satin alloy, with polished rim lips. Retained details include cut tyre grooves, rotors, fasteners, ignition printing, switch symbols, lens covers, glovebox seam, footrests, suspension, brake fittings and stand spring.

The supplied black/grey photographs control the finish and proportions. Additional older Pusa galleries were consulted only for compatible visible fittings. Exact trim/year/power was not confirmed; other variants' brown seats, newer displays and top cases were not copied. The registration stays blank. Optical patterns, dimensions and small fittings remain approximations from photographs, not measured engineering data. Concealed structures are not reconstructed.

Reflections depend on the viewer's environment lighting. Pusa-Outdoor-Reflections.hdr is an optional CC0 daylight environment from Poly Haven, included in the lighting pack. On this Windows device the scoped F3D v6 preset already loads it with ambient occlusion and tone mapping. On another device, load the GLB normally and select the HDR environment if the viewer offers that setting. Rendering, transparency and lighting support can vary between desktop and Android.

Desktop CLI, avoiding the file picker:
"C:\Program Files\F3D\bin\f3d.exe" --watch "Pusa-Efun-v6-PBR.glb"

Portable CLI with the HDR beside the model:
f3d --watch --hdri-file=Pusa-Outdoor-Reflections.hdr --hdri-ambient --tone-mapping --ambient-occlusion Pusa-Efun-v6-PBR.glb

Validation: 336 exported components are valid solids; equal mirrored panel volumes; zero panel/body overlap. Native source: 2,295,844 triangles. Viewing model: 1,189,316 triangles, after bounded simplification of very dense thin features. Sampled checks are recorded in Viewing-Geometry-Verification.json. Native geometry is preserved separately. Khronos glTF validator: 0 errors and 0 warnings. Both sides, front, rear and detail views were rendered in F3D for inspection. See the verification JSON files.

FreeCAD, STEP, OBJ and STL files remain in the local output directory, in millimetres/Z-up. STL carries geometry only and contains separate mechanical solids; it is not a fused print-ready assembly. Use the GLB for materials and textures. Only the current FreeCAD document is kept open; earlier versions remain on disk.

GLB SHA-256: 3bcc63abe830430c68deb8050792b6e0efca9e33c560724815e3123147306748
